1: Precautions before starting up
Before using the wire and cable testing equipment to start the test, first make a sample to evaluate the performance of the device when it is used. Also, start the tensile test function and set the speed of the test. Also choose a suitable voltage and set the function switch to the discharge zero position.
2: Precautions when using
When using wire and cable testing equipment, pay attention to distinguishing materials with different wire diameters, and pay attention to the design of different wire diameters during testing to avoid abnormalities in the equipment during improper operation. Also, when sampling, it is necessary to take a sufficient length sample to avoid the aging or damage of the wire during the experiment, and the desired data cannot be accurately tested. Therefore, at least five samples of different wires are required for testing. After the test, you should do the appropriate labeling and make relevant data records.
3: Precautions after use
Pay attention to the corresponding maintenance measures after using the wire and cable inspection equipment, so as to avoid the smoother operation and interference of the equipment when the equipment is used again. Pay special attention to cut off the power cord and then clean the remaining line segments and line slag, and record the corresponding result data for inquiry.